Settings - ABB REG650 Technical Manual

1MRK 502 043-UUS B
13.8.5
13.8.6
Technical Manual
Name Type
OUT13 BOOLEAN
OUT14 BOOLEAN
OUT15 BOOLEAN
OUT16 BOOLEAN

Settings

The function does not have any parameters available in local HMI or Protection and
Control IED Manager (PCM600)
Operation principle
Integer to boolean conversion with logic node representation function (IB16FCVB) is
used to transform an integer into a set of 16 binary (logical) signals. IB16FCVB
function can receive an integer from a station computer – for example, over IEC
61850. The BLOCK input will freeze the logical outputs at the last value.
The operator position input (PSTO) determines the operator place. The integer number
can be written to the block while in "Remote". If PSTO is in "Off" or "Local", then no
change is applied to the outputs.
Description
Output 13
Output 14
Output 15
Output 16
Section 13
Logic
389