Function Block - ABB REG650 Technical Manual

Section 12
Control
12.5.3
12.5.4
12.5.5
12.5.6
348

Function block

DPGGIO
OPEN POSITION
CLOSE
VALID
IEC09000075_1_en.vsd
IEC09000075 V1 EN
Figure 159: DPGGIO function block
Signals
Table 213: DPGGIO Input signals
Name Type
OPEN BOOLEAN
CLOSE BOOLEAN
VALID BOOLEAN
Table 214: DPGGIO Output signals
Name Type
POSITION INTEGER
Settings
The function does not have any parameters available in Local HMI or Protection and
Control IED Manager (PCM600).
Operation principle
Upon receiving the input signals, the IEC 61850 generic communication I/O functions
(DPGGIO) function block will send the signals over IEC 61850-8-1 to the equipment
or system that requests these signals. To be able to get the signals, PCM600 must be
used to define which function block in which equipment or system should receive this
information.
Default Description
0 Open indication
0 Close indication
0 Valid indication
Description
Double point indication
1MRK 502 043-UUS B
Technical Manual