Technical Data - ABB REG650 Technical Manual

Section 6
Differential protection
6.1.4
6.2
6.2.1
110

Technical data

Table 28: T2WPDIF, T3WPDIF (87T) technical data
Function
Operating characteristic
Reset ratio
Unrestrained differential current limit
Base sensitivity function
Minimum negative sequence current
Operate angle, negative sequence
Second harmonic blocking
Fifth harmonic blocking
Connection type for each of the windings
Phase displacement between high voltage
winding, W1 and each of the windings, W2
and W3. Hour notation
Operate time, restrained function
Reset time, restrained function
Operate time, unrestrained function
Reset time, unrestrained function
1Ph High impedance differential protection HZPDIF
(87)
Identification
Function description
1Ph High impedance differential
protection
Range or value
Adaptable
>94%
IBase on
(1.00-50.00)x
high voltage winding
IBase
(0.05 - 0.60) x
IBase
(0.02 - 0.20) x
(30.0 - 90.0) degrees
(5.0-100.0)% of
fundamental differential
current
(5.0-100.0)% of
fundamental differential
current
Wye or delta
0–11
25 ms typically at 0 to
5 x set level
25 ms typically at 5 to
0 x set level
20 ms typically at 0 to
5 x set level
25 ms typically at 5 to
0 x set level
IEC 61850 IEC 60617
identification identification
Id
HZPDIF
SYMBOL-CC V2 EN
1MRK 502 043-UUS B
Accuracy
± 1.0% of In for I < In
± 1.0% of I for I > In
-
± 1.0% of set value
± 1.0% of In
± 1.0% of In
± 1.0 degrees
± 2.0% of applied harmonic
magnitude
± 12.0% of applied harmonic
magnitude
-
-
-
-
-
-
ANSI/IEEE C37.2
device number
87
Technical Manual