Signals - ABB REG650 Technical Manual

Section 12
Control
12.9.3
12.9.4
Table 226: I103IEDCMD Non group settings (basic)
Name Values (Range)
FunctionType 1 - 255
12.10
12.10.1
356

Signals

Table 224: I103IEDCMD Input signals
Name Type
BLOCK BOOLEAN
Table 225: I103IEDCMD Output signals
Name Type
19-LEDRS BOOLEAN
23-GRP1 BOOLEAN
24-GRP2 BOOLEAN
25-GRP3 BOOLEAN
26-GRP4 BOOLEAN
Settings
Unit Step
- 1
Function commands user defined for IEC
60870-5-103 I103USRCMD
Functionality
I103USRCMD is a command block in control direction with user defined output
signals. These function blocks include the FunctionType parameter for each block in
the private range, and the Information number parameter for each output signal.
Default Description
0 Block of commands
Description
Information number 19, reset LEDs
Information number 23, activate setting group 1
Information number 24, activate setting group 2
Information number 25, activate setting group 3
Information number 26, activate setting group 4
Default Description
255 Function type (1-255)
1MRK 502 043-UUS B
Technical Manual