Settings - ABB REG650 Technical Manual

Section 14
Monitoring
14.1.4.4
Table 294: VMMXU Non group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
GlobalBaseSel 1 - 6
VLDbRepInt 1 - 300
VLMax 0 - 4000000
VLRepTyp Cyclic
Dead band
Int deadband
VLAngDbRepInt 1 - 300
Table 295: VMMXU Non group settings (advanced)
Name Values (Range)
VLZeroDB 0 - 100000
VLHiHilLim 0 - 4000000
VLHiLim 0 - 4000000
VLLowLim 0 - 4000000
VLowLowLim 0 - 4000000
VLMin 0 - 4000000
VLLimHys 0.000 - 100.000
14.1.4.5
402

Settings

Unit Step
- -
- 1
Type 1
V 1
- -
Type 1
Unit Step
m% 1
V 1
V 1
V 1
V 1
V 1
V 0.001
Monitored data
Table 296: VMMXU Monitored data
Name Type
V_AB REAL
VAB_ANGL REAL
V_BC REAL
VBC_ANGL REAL
V_CA REAL
VCA_ANGL REAL
Default Description
Disabled Operation Disable / Enable
1 Selection of one of the Global Base Value
groups
10 Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
170000 Maximum value
Dead band Reporting type
10 Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Default Description
500 Zero point clamping
160000 High High limit (physical value)
150000 High limit (physical value)
125000 Low limit (physical value)
115000 Low Low limit (physical value)
0 Minimum value
5.000 Hysteresis value in % of range and is
common for all limits
Values (Range) Unit
- kV
- deg
- kV
- deg
- kV
- deg
1MRK 502 043-UUS B
Description
V_AB Amplitude
VAB Angle
V_BC Amplitude
VBC Angle
V_CA Amplitude
VCA Angle
Technical Manual