Ied Status For Iec 60870-5-103 I103Ied - ABB REG650 Technical Manual

1MRK 502 043-UUS B
14.22
14.22.1
14.22.2
14.22.3
14.22.4
Table 377: I103IED Non group settings (basic)
Name Values (Range)
FunctionType 1 - 255
Technical Manual

IED status for IEC 60870-5-103 I103IED

Functionality
I103IED is a function block with defined IED functions in monitor direction. This
block uses parameter as FunctionType, and information number parameter is defined
for each input signal.
Function block
I103IED
BLOCK
19_LEDRS
21_TESTM
23_GRP1
24_GRP2
25_GRP3
26_GRP4
IEC10000292-1-en.vsd
IEC10000292 V1 EN
Figure 231: I103IED function block
Signals
Table 376: I103IED Input signals
Name Type
BLOCK BOOLEAN
19_LEDRS BOOLEAN
21_TESTM BOOLEAN
23_GRP1 BOOLEAN
24_GRP2 BOOLEAN
25_GRP3 BOOLEAN
26_GRP4 BOOLEAN
Settings
Unit Step
- 1
Default Description
0 Block of status reporting
0 Information number 19, reset LEDs
0 Information number 21, test mode is active
0 Information number 23, setting group 1 is active
0 Information number 24, setting group 2 is active
0 Information number 25, setting group 3 is active
0 Information number 26, setting group 4 is active
Default Description
1 Function type (1-255)
Section 14
Monitoring
505