Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
4.1 Introduction
This section describes function of display commands.
You can use display commands to view the status of a device and check whether the device runs
normally.
4.2 Checking the Status of the S3700
This section describes how to check the status of the S3700 by using the display commands.
4.2.1 Checking Information About the S3700
Context
You can run the following command in any view to check the type and status of a component
on the S3700.
Procedure
Step 1 Run:
display device [ slot slot-id ]
Information about a component on the S3700 is displayed.
----End
4.2.2 Checking the Version of the S3700
Context
You can run the display version command in any view to check the version of the S3700.
The displayed information includes the type of a card, startup duration, version of the hardware,
and version of the software.
Procedure
Step 1 Run:
display version [ slot slot-id ]
The version of the specified card is displayed.
----End
4.2.3 Checking the Electronic Labels
Context
You can run the display elabel command in any view to check the electronic labels.
Issue 01 (2011-07-15)
4 Using display commands to check the status of the device
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40