Establishing The Configuration Task; Enabling The Information Center - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management

6.2.1 Establishing the Configuration Task

Applicable Environment
To collect debugging information, logs, and traps during the operation of the S3700, and to send
them to the terminal for display, or to the buffer or the host for storage, you need to configure
the information center.
Pre-configuration Tasks
None.
Data Preparation
To manage the information center, you need the following data.
No.
1
2
3
4
5

6.2.2 Enabling the Information Center

Context
Do as follows on the S3700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center enable
The information center view is displayed.
----End
Issue 01 (2011-07-15)
Data
(Optional) Numbers and names of the information channels
(Optional) Format of the timestamp
(Optional) Information severity
(Optional) Language used in the logs and the address of the log host
(Optional) Size of the log buffer and the trap buffer
NOTE
The system sends the system information to the log host and the console only after the information center
is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Monitoring the Device Through the Information Center
55