Optional) Setting The User Name Format Supported By A Radius Server; Optional) Setting The Traffic Unit For A Radius Server - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
By default, the shared key of a RADIUS server is huawei.
----End
1.5.6 (Optional) Setting the User Name Format Supported by a
RADIUS Server
Context
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server user-name domain-included
The user name format supported by a RADIUS server is set.
By default, a user name supported by a RADIUS server contains the domain name. That is, the
S9300 sends the user name, domain name, and domain name delimiter to the RADIUS server
for authentication.
When the RADIUS server does not accept the user name that contains the domain name, you
can run the undo radius-server user-name domain-included command to delete the domain
name before sending it to the RADIUS server.
----End

1.5.7 (Optional) Setting the Traffic Unit for a RADIUS Server

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server traffic-unit { byte | kbyte | mbyte | gbyte }
Issue 01 (2009-07-28)
NOTE
A user name is in the user name@domain name format and the characters after @ refer to the domain name.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
1-19