Program 26 : Ars Service & Least Cost Routing; Automatic Route Selection (Ars/F-Route) Service - NEC SL2100 Programming Manual

ISSUE 2.0
Program 26 : ARS Service & Least Cost

26-01 : Automatic Route Selection (ARS/F-Route) Service

Level:
IN
Description
Use Program 26-01 : Automatic Route Selection Service (ARS/F-Route) to define the system
options for Automatic Route Selection (ARS/F-Route).
Input Data
Item Item
No.
01 ARS Service
02 Network Outgo-
ing Inter-Digit
ARS Time
03 ARS Misdialed
Number Han-
dling
06 Class of Service
Match Access
07 F-Route Access
COS Reference
Conditions
None
Feature Cross Reference
• Automatic Route Selection (ARS/F-Route)
Programming Manual
Input Data
0 = Disabled (ARS Enable or disable ARS.
service is OFF.)
1 = Enabled (ARS serv-
ice is ON.)
0 ~ 64800 seconds With Networking, this time replaces
20-03-04 when determining if all
network protocol digits have been
received. If ARS is enabled at Site
B, this time can be programmed for
5 (500 ms) at Site A. If ARS is disa-
bled and Site B is using F-Route for
outbound dialing, this time should
be programmed for 30 (three sec-
onds) at Site A.
0 = Route to Trunk If a user dials a number not pro-
Group 1 grammed in ARS, this option deter-
1 = Play Warning Tone mines if the system should route
to Dialer over Trunk Group 1 or play error
tone.
0 = Disabled (ARS This enables/disables the ARS class
service is OFF.) of service settings.
1 = Enabled (ARS serv-
ice is ON.)
0 = F-Route
1 = ARS
Description Default
SL2100
Routing
Program
26
Related
Program
0 26-02
26-03
26-04
26-05
30 20-03-04
0 21-02
26-02
0 26-02
0 26-02
44-05
2-337