Front Turn Signal Lamp - Chrysler 2005 Crossfire SRT6 Service Manual

8L - 100 LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
INSTALLATION
1. Press the front position lamp bulb into the socket
and insert it into the headlamp unit (1), rotating
clockwise to lock.
2. Install the headlamp unit. (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP -
INSTALLATION).
3. Connect the negative battery cable.

FRONT TURN SIGNAL LAMP

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the headlamp unit. (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP -
REMOVAL).
3. Rotate the turn signal bulb housing (1) counter-
clockwise and remove from the headlamp unit (2).
4. Remove the bulb from the bulb housing.
ZH