Front Turn Signal Lamp - Chrysler 200 2017 Owner's Manual

512 MAINTAINING YOUR VEHICLE
5. Disconnect the bulb from the electrical connector and
then connect the replacement bulb.
Headlamp Bulb
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
6. Install the bulb and connector assembly into the head-
lamp housing and rotate clockwise to lock it in place.
7. Install the headlamp bulb cap in the headlamp housing
and rotate clockwise to lock it in place.
8. Lock headlamp access door in wheel liner.

Front Turn Signal Lamp

1. Open the hood.
NOTE: Removal of the air cleaner filter housing may be
necessary prior to replacing bulbs in the lamp assembly on
the passenger side of the vehicle.
2. Remove the beauty cover, by removing all push pins
and lifting beauty cover.
Beauty Cover