Chrysler 2005 Crossfire SRT6 Service Manual page 1650

8W - 01 - 14
5. Solder the connection(2) together using a soldering
iron(3) and rosin core type solder(1) only.
CAUTION: DO NOT USE ACID CORE SOLDER.
6. Center the heat shrink tubing(2) over the joint and
heat using a heat gun. Heat the joint until the tub-
ing is tightly sealed and sealant(1) comes out of
both ends of the tubing.
8W-01 WIRING DIAGRAM INFORMATION
ZH