Chrysler 2005 Crossfire SRT6 Service Manual page 668

8A - 14 AUDIO - ELECTRICAL DIAGNOSTICS
*NO SOUND FROM LEFT REAR SPEAKER (CONTINUED)
2.
MEASURE LEFT REAR SPEAKER CIRCUIT RESISTANCE
With the ignition off.
Connect a jumper wire between cavity 3 and cavity 4 of the Left Rear
Speaker harness connector.
Measure the resistance between cavity 12 (connector B) and cavity 4
(connector B) of the Power Amplifier harness connector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Left Rear Speaker. (Refer to 8 - ELECTRI-
CAL/AUDIO/SPEAKER - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Left Rear Speaker Ground circuit or Supply
Voltage circuit for an open.
Perform BODY VERIFICATION TEST.
ZH