Chrysler 2005 Crossfire SRT6 Service Manual page 1485

ZH
INSTALLATION
1. Route the seat belt buckle harness through the
seat.
2. Position the seat belt buckle to the seat.
3. Install the bolt (1) to the seat belt buckle. Tighten to
35 N·m (26 ft. lbs.).
4. Connect the seat belt buckle harness connector.
5. Install the front seat.
6. Reconnect the power seat harness connectors.
7. Install the seat belt bolt (2). Tighten the seat belt
bolt to 35 N·m (26 ft. lbs.).
8. Install the seat track rear bolts (1). Tighten the rear
bolts to 50 N·m (37 ft. lbs.).
RESTRAINTS - SERVICE INFORMATION 8O - 129