Removal; Installation - Chrysler 2005 Crossfire SRT6 Service Manual

ZH

REMOVAL

1. Disconnect the negative battery cable.
2. Using a plastic wedge, slide the wedge under the
Universal Garage Door Opener/Tire Pressure Mon-
itor module and the headliner and pry the Universal
Garage Door Opener/Tire Pressure Monitor module
away from the headliner.
3. Disconnect the Universal Garage Door Opener/Tire
Pressure Monitor module harness connector.

INSTALLATION

1. Connect the harness connector to the Universal
Garage Door Opener/Tire Pressure Monitor mod-
ule.
2. Install the Universal Garage Door Opener/Tire
Pressure Monitor module by snapping it into the
headliner.
3. Connect the negative battery cable.
MESSAGE SYSTEMS 8M - 3