Chrysler 2005 Crossfire SRT6 Service Manual page 940

8I - 16 IGNITION SYSTEM - SERVICE INFORMATION
Note: When installing the spark plug cables, route
the cables correctly. Failure to route the cables
properly can cause improper spark plug phase-
shift.
4. Install the spark plug cables to the appropriate coil
tower (A & B) (coil side).
5. Install the spark plug cables to the appropriate
spark plug location (G & K) (plug side).
Note: Refer to the reference pad cast into the cyl-
inder head cover to identify proper spark plug/
spark plug cable orientation.
Note: When installing spark plug cables, insure a
positive connection is made. A snap should be felt
when a good connection is made between the
spark plug cable and the spark plug.
6. Insure a firm connection is made from the spark
plug cables (3) to the spark plugs.
ZH