8H - 10
HORN - SERVICE INFORMATION
OPERATION
The Horn circuit feed is from the fuse to the horn relay within the Relay Control Module (3), both of which are
located inside the Control Module Box (5). When the Horn Switch is depressed, it completes the ground circuit to
the horn relay. The horn relay coil closes a set of contacts which allows current to flow to the Horns.
SPECIFICATIONS - HORN
TORQUE SPECIFICATIONS
DESCRIPTION
HORN MOUNTING
BRACKET BOLT
HORN SWITCH
RETAINING NUTS
N·m
11
5
Ft. Lbs.
8
–
ZH
In. Lbs.
100
44