Chrysler 2005 Crossfire SRT6 Service Manual page 1011

ZH
*BATTERY VOLTAGE INDICATOR INOPERATIVE (CONTINUED)
2.
MEASURE BATTERY VOLTAGE INDICATOR CIRCUIT RESISTANCE
Turn the ignition off.
Disconnect the Generator harness connector.
Measure the resistance of the Battery Voltage Indicator circuit from the
Generator harness connector to the Instrument Cluster C1 harness
connector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Generator. (Refer to 8 - ELECTRICAL/
CHARGING/GENERATOR - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Battery Voltage Indicator circuit for an open.
Perform BODY VERIFICATION TEST.
INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS 8J - 57