Chrysler 2005 Crossfire SRT6 Service Manual page 1516

8Q - 10 VEHICLE THEFT SECURITY - ELECTRICAL DIAGNOSTICS
NO COMMUNICATION WITH BCM AND CENTRAL LOCKING PUMP/SECURITY SYSTEM MODULE
(CONTINUED)(CONTINUED)
2.
MEASURE THE RESISTANCE OF THE CAN B BUS (-) CIRCUIT
Measure the resistance of the CAN B Bus (-) circuit from the CLP/
SSM harness connector to the BCM harness connector.
Is the resistance below 1.0 ohm?
Yes >> Replace the Central Locking Pump/Security System Mod-
ule. (Refer to 8 - ELECTRICAL/VEHICLE THEFT SECU-
RITY/SENTRY
REMOVAL).
Perform VTSS VERIFICATION TEST.
No >> Repair the CAN B Bus (-) circuit for an open.
Perform VTSS VERIFICATION TEST.
KEY REMOTE ENTRY MODULE -
ZH