8R - 62
WIPERS/WASHERS - SERVICE INFORMATION
1. Disconnect the negative battery cable.
2. Remove the wiper module (1) from the vehicle.
(Refer to 8 - ELECTRICAL/WIPERS/WASHERS/
WIPER MODULE - REMOVAL)
3. Remove the crank arm retaining nut (1) from the
wiper motor shaft (2).
4. Scribe a reference mark (3) on both the wiper mod-
ule and the crank arm for proper alignment during
reassembly.
5. Press the crank arm (4) off of the wiper motor shaft
(2).
ZH