Power Window Switch - Chrysler 2005 Crossfire SRT6 Service Manual

8N - 124 POWER WINDOWS - SERVICE INFORMATION
INSTALLATION
Note: Insure the original mounting hole pattern is
used when installing the power window motor.
Note: Before installing, lightly grease the gear on
the power window motor.
1. Position the power window motor into the door.
2. Install the three power window motor attaching riv-
ets (2).
3. Connect the power window motor harness connec-
tor (1).
4. Install the door watershield (1).
5. Install the door interior trim panel. (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - INSTALLA-
TION).
6. Connect the negative battery cable.

POWER WINDOW SWITCH

REMOVAL
WARNING: REFER TO RESTRAINTS BEFORE ATTEMPTING ANY DOOR, SEAT, STEERING WHEEL, STEER-
ING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE
PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PER-
SONAL INJURY.(Refer to 8 - ELECTRICAL/RESTRAINTS - WARNING).
ZH