Chrysler 2005 Crossfire SRT6 Service Manual page 857

ZH
3. Check the solenoid (1) for continuity between the
solenoid terminal (2) and the solenoid field coil ter-
minal (4) with a continuity tester (3). There should
be continuity. If OK, go to Step 4. If not OK,
replace the faulty starter motor assembly.
4. Using a continuity tester (3), check for continuity
between the solenoid terminal (2) and the solenoid
case (1). There should be continuity. If not OK,
replace the faulty starter motor assembly.
STARTING SYSTEM 8F - 45