Specifications - Power Locks; Central Locking Pump; Description; Diagnosis And Testing - Chrysler 2005 Crossfire SRT6 Service Manual

8N - 34 POWER LOCKS - SERVICE INFORMATION ZH
from inside unlocks that door only. If the vehicle was locked using the power lock switch in the center console while
in the Global mode, opening a door from the inside unlocks both doors and the rear liftgate. If the vehicle was
locked using the RKE transmitter, the doors and rear liftgate cannot be unlocked using the power lock switch in the
center console. If the vehicle was locked from the outside, opening a door from the inside will not unlock other
openings but it will trigger the alarm.

SPECIFICATIONS - POWER LOCKS

PNEUMATIC SPECIFICATIONS

DESCRIPTION

SPECIFICATION
Allowable system leakage of 300 mbar (8.9 in Hg) 30 mbar (.9 in Hg)
vacuum in 1 minute.
≤ 25 mbar (.74 in Hg)
Allowable leakage of actuators with line at 300 mbar
(8.9 in Hg) vacuum in 1 minute.
TORQUE SPECIFICATIONS
DESCRIPTION N·m Ft. Lbs. In. Lbs.
DOOR LOCK
8 — 70
ATTACHMENT SCREWS

CENTRAL LOCKING PUMP

DESCRIPTION
The Central Locking Pump/Security System Module
(3) is the pressure/vacuum supply pump for the power
lock system. It is located in the right rear quarter panel
area beneath the floor covering. For complete Central
Locking Pump/Security System Module removal pro-
cedures, refer to Security System Module removal in
the Vehicle Theft section.

DIAGNOSIS AND TESTING

WARNING: REFER TO RESTRAINTS BEFORE ATTEMPTING ANY DOOR, SEAT, STEERING WHEEL, STEER-
ING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE
PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PER-
SONAL INJURY. (Refer to 8 - ELECTRICAL/RESTRAINTS - WARNING).