Chrysler 2005 Crossfire SRT6 Service Manual page 998

8J - 44 INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS
CAN BUS COMMUNICATION GENERAL MALFUNCTION (CONTINUED)
2.
MEASURE THE RESISTANCE OF THE CAN C BUS (-) CIRCUIT
With the ignition off.
Measure the resistance of the CAN C Bus (-) circuit from the Instru-
ment Cluster harness connector to the harness connectors of the other
modules on the CAN Bus network.
Is the resistance below 1.0 ohm?
Yes >> Replace the Instrument Cluster. (Refer to 8 - ELECTRI-
CAL/INSTRUMENT CLUSTER - REMOVAL).
Perform ABS VERIFICATION TEST.
No >> Repair the CAN C Bus (-) circuit for an open.
Perform ABS VERIFICATION TEST.
ZH