8N - 98
POWER SEATS - SERVICE INFORMATION
INSTALLATION
Note: Insure the harness is routed and secured in
its original position to avoid potential interference
with moving parts.
1. Install the power seat switch wiring harness in its
original location.
2. Connect the power seat switch harness connectors
(1) and (2).
3. Position the side panel with the switches as one
part on the seat base, then install the side panel
attaching screw (1).
4. Install the front seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION).
5. Connect the negative battery cable.
ZH