Chrysler 2005 Crossfire SRT6 Service Manual page 1254

8N - 24 POWER LOCKS - ELECTRICAL DIAGNOSTICS
DOOR LOCK/DOOR UNLOCK SWITCH SENSE CIRCUIT (CONTINUED)
6.
MEASURE THE RESISTANCE OF THE DOOR LOCK SWITCH SENSE CIRCUIT
Turn the ignition off.
Measure the resistance between ground and the Door Lock Switch
Sense circuit at the SKREEM harness connector.
Is the resistance below 10K ohms?
Yes >> Repair the Door Lock Switch Sense circuit for a short to
ground.
Perform BODY VERIFICATION TEST.
No >> Go to 7
7.
MEASURE THE RESISTANCE OF THE DOOR UNLOCK SWITCH SENSE CIRCUIT
Measure the resistance between ground and the Door Unlock Switch
Sense circuit at the SKREEM C1 harness connector.
Is the resistance below 10K ohms?
Yes >> Repair the Door Unlock Switch Sense circuit for a short to
ground.
Perform BODY VERIFICATION TEST.
No >> Replace the Body Control Module. (Refer to 8 - ELECTRI-
CAL/ELECTRONIC CONTROL MODULES/BODY CON-
TROL/CENTRAL TIMER MODUL - REMOVAL).
Perform BODY VERIFICATION TEST.
ZH