Chrysler 2005 Crossfire SRT6 Service Manual page 1462

8O - 106 RESTRAINTS - SERVICE INFORMATION
Note: If the passenger airbag has been deployed, carefully inspect the airbag mounting points on the instru-
ment panel. If the airbag mounting points have been damaged or deformed, the instrument panel structural
duct must be replaced.
INSTALLATION
1. Verify the negative battery cable (2) is discon-
nected before proceeding. Wait two minutes for
the system capacitor to discharge before fur-
ther service.
2. Carefully position the passenger airbag unit onto
the instrument panel.
3. Install the four bolts (1) that secure the passenger
airbag to the instrument panel. Tighten to 35 N·m
(26 ft. lbs.).
ZH