ZH
4. Index the two retainer springs (2) into the retention
slots.
5. Slide the wiper blade (2) onto the wiper arm until
fully seated.
6. Gently return the wiper arm to the operational
position.
WIPER LINKAGE
DESCRIPTION
The wiper linkages are integral parts of the Wiper Module Assembly. They cannot be adjusted or repaired. If faulty,
worn, or damaged, the entire wiper module must be replaced as an assembly. For complete Wiper Module Removal
procedures, refer to (Refer to 8 - ELECTRICAL/WIPERS/WASHERS/WIPER MODULE - REMOVAL).
WIPERS/WASHERS - SERVICE INFORMATION 8R - 55