Chrysler 2005 Crossfire SRT6 Service Manual page 1033

ZH
Telescoping Wheel Indicator Lamp
The Telescoping wheel indicator lamp illuminates if the
manually telescoping wheel is not locked into position.
Turn Signal Indicator Lamp
The Turn signal indicator lamps (1), located in the
upper portion of the speedometer on the right and left
of the ESP indicator, illuminate when either the right or
left turn signal is activated by the multifunction switch
on the steering column. Both lamps will illuminate
when the Emergency Flasher switch has been
activated.
INSTRUMENT CLUSTER CHIME FUNCTION
The Instrument Cluster generates audible tones through its chime function in order to notify the driver of specific
vehicle conditions. The following are conditions that will trigger the chime function to operate:
1. Turn signal indicator
Activating the turn signal switch is indicated audibly by the turn signal indicator ticking. The driver's attention is
brought to a problem in the turn signal system by the turn signal indicator ticking at a higher frequency. The turn
signal indicator ticking is generated electromagnetically. The frequency corresponds to that of the turn signal indi-
cator lamp.
2. Parking Brake-on reminder
The chime is activated whenever the cluster detects the parking brake is applied at a speed of 5 km/h (3 MPH)
or more.
3. Headlamps-on reminder
The chime is activated whenever the cluster detects that the headlamp switch is in the ON position with the
ignition key removed from the ignition, and the driver's door is open.
4. Key-in-ignition reminder
The chime is activated whenever the cluster detects that the key is in the ignition and the driver's door is open.
INSTRUMENT CLUSTER - SERVICE INFORMATION 8J - 79