Chrysler 2005 Crossfire SRT6 Service Manual page 1558

8Q - 52 VEHICLE THEFT SECURITY - SERVICE INFORMATION
INSTALLATION
1. Install the central locking pump/security system
module (3) into the trunk and connect the air lines
(2) and the electrical harness (1).
2. Install the central locking pump/security system
module into sound deadening foam covering and
slide it back into place.
3. Install the right half of the trunk floor covering (3).
4. Install the rear interior trim panel (2).
5. Install the right side interior trim panel (4).
6. Install the right upper trim panel (1).
7. Install the trunk floor carpet.
8. Connect the negative battery cable.
ZH