Installation - Chrysler 2005 Crossfire SRT6 Service Manual

8L - 148 LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION

INSTALLATION

1. Insert the bulb into the lamp socket.
2. Install the lamp socket into the courtesy lamp
switch/unit by rotating clockwise.
3. Install the courtesy lamp switch/unit to the roof
frame. (Refer to 8 - ELECTRICAL/LAMPS/LIGHT-
ING - INTERIOR/COURTESY LAMP SWITCH -
INSTALLATION).
COURTESY LAMP DEFEAT SWITCH
DESCRIPTION
With the courtesy lamp defeat switch in the "O" posi-
tion (1), the courtesy lamps are prevented from illumi-
nating when the doors are opened. With the courtesy
lamp defeat switch in the "—" position, the courtesy
lamps illluminate when the doors are opened, then
fade to off approximately 8 seconds after the last door
is closed (unless the courtesy lamp switch is
depressed). If a door remains unclosed, the lamps will
remain on for approximately 5 minutes. At this time
the Body Control Module will interrupt the ground path
to conserve battery power. The courtesy lamp defeat
switch is an integrated part of the courtesy lamp unit
assembly and cannot be adjusted or repaired. If faulty,
worn, or damaged, the entire assembly must be
replaced. For complete courtesy lamp unit removal
procedures, refer to Courtesy Lamp Unit removal in
this section.
ZH