Power Windows - Electrical Diagnostics - Chrysler 2005 Crossfire SRT6 Service Manual

8N - 112

POWER WINDOWS - ELECTRICAL DIAGNOSTICS

*LEFT FRONT POWER WINDOW INOPERATIVE (CONTINUED)
3.
MEASURE LEFT POWER WINDOW SWITCH SENSE CIRCUIT RESISTANCE
Turn the ignition off.
Disconnect the Body Control Module (BCM) harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance of the Left Power Window Switch Sense circuit
from the Left Front Power Window Switch harness connector to the
BCM C4 harness connector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Body Control Module. (Refer to 8 - ELECTRI-
CAL/ELECTRONIC CONTROL MODULES/BODY CON-
TROL/CENTRAL TIMER MODUL - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Left Power Window Switch Sense circuit for an
open.
Perform BODY VERIFICATION TEST.
4.
MEASURE GROUND CIRCUIT RESISTANCE
Turn the ignition off.
Disconnect the Body Control Module (BCM) harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance of the Ground circuit from the Left Front
Power Window Switch harness connector to the BCM C4 harness con-
nector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Left Front Power Window Switch. (Refer to 8
- ELECTRICAL/POWER WINDOWS/POWER WINDOW
SWITCH - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Ground circuit for an open.
Perform BODY VERIFICATION TEST.
ZH