Chrysler 2005 Crossfire SRT6 Service Manual page 1461

ZH
4. Disconnect the passenger airbag squib harness
connector (1) from the passenger side airbag.
CAUTION: Do not pull on the squib connector
wires or pry on the connector insulator to disen-
gage the connector from the passenger airbag
inflator connector receptacle. Improper removal of
the squib wires and their connector insulators can
result in damage to the airbag circuits or connec-
tor insulators.
5. Remove the four bolts (1) that secure the airbag to
the instrument panel.
6. Remove the passenger airbag as a unit.
WARNING: DO NOT PLACE AN INTACT UNDE-
PLOYED AIRBAG FACE DOWN ON A HARD SUR-
FACE, THE AIRBAG WILL PROPEL INTO THE AIR
IF ACCIDENTALLY DEPLOYED.
RESTRAINTS - SERVICE INFORMATION 8O - 105