Installation - Rhd - Chrysler 2005 Crossfire SRT6 Service Manual

8E - 82 ELECTRONIC CONTROL MODULES - SERVICE INFORMATION
ZH
4. Install the plastic control module box cover (1) and
slide the clips rearward to lock the cover.
5. Connect the negative battery cable (2).

INSTALLATION - RHD

1. Connect the PCM harness electrical connector to the powertrain control module (2).
2. Install the powertrain control module into the control module box (5).
3. Install the plastic control module box cover (1) and slide the clips rearward to lock the cover.
4. Connect the negative battery cable.