Chrysler 2005 Crossfire SRT6 Service Manual page 1500

8P - 6 SPEED CONTROL - ELECTRICAL DIAGNOSTICS
(P0575) SPEED CONTROL SWITCH INPUT CIRCUIT (CONTINUED)
7.
INTERMITTENT WIRING AND CONNECTORS
The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for a possible
intermittent condition.
Note: Check connectors — Clean/repair as necessary. Poor pin to terminal connections can set DTCs.
Using the wiring diagrams as a guide, inspect the wiring and connectors specific to this DTC. Wiggle the wires while
checking for shorts and/or open circuits.
Note: Check for any Technical Service Bulletins that may apply.
Were any problems found?
Yes >> Repair as necessary.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
No >> Test Complete.
ZH