Power Lock Switch; Battery Replacement; Transmitter Range - Chrysler 2005 Crossfire SRT6 Service Manual

8N - 36 POWER LOCKS - SERVICE INFORMATION ZH

BATTERY REPLACEMENT

The transmitter has two 3 volt batteries, which can be
removed and replaced without special tools. First,
release the key from the closed position; then insert a
coin in the side slot of the transmitter and twist. The
cover should separate from the body of the transmitter
where the batteries are stacked on top of each other.
The batteries are available at local retail stores. Rec-
ommended replacement batteries are Panasonic CR
2025 lithium or equivalent. Battery life for normal use
is about two years.
Note: The transmitter MUST be reprogrammed
after the batteries are replaced.

TRANSMITTER RANGE

Operation range is within 20 meters (66 feet) of the module/receiver.

POWER LOCK SWITCH

DESCRIPTION
The mounting arrangement of the power lock switch is unique and integrated with additional switches within the trim
panel on the center console. The power lock switch is not serviceable separately. When replacement is necessary,
the service part includes additional switches.
REMOVAL
WARNING: REFER TO RESTRAINTS BEFORE ATTEMPTING ANY DOOR, SEAT, STEERING WHEEL, STEER-
ING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE
PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PER-
SONAL INJURY. (Refer to 8 - ELECTRICAL/RESTRAINTS - WARNING).