Chrysler 2005 Crossfire SRT6 Service Manual page 1267

ZH
1. Disconnect the negative battery cable.
2. Remove the center console interior trim panel.
(Refer to 23 - BODY/INTERIOR/CENTER CON-
SOLE - REMOVAL).
3. Disconnect the power lock switch and ESP harness
connectors (1).
4. Press the locking tabs inward and remove the
outer gang of switches.
5. Press the locking tabs inward and remove the
power lock, hazard, and ESP switch from the trim
panel.
INSTALLATION
1. Align the power lock switch with the center console
interior trim panel and press together until the lock-
ing tabs engage fully.
POWER LOCKS - SERVICE INFORMATION 8N - 37