Installation - Remote Keyless Entry Relay - Chrysler 2005 Crossfire SRT6 Service Manual

ZH
INSTALLATION
INSTALLATION
1. Install the SKREEM module to the base plate.
2. Connect the 18-pin harness connector and the
2-pin CAN BUS harness connector (1) to the
SKREEM module.
3. Connect the 2-pin harness connector for the sentry
key antenna ring.
4. Install the Instrument Cluster. (Refer to 8 - ELEC-
TRICAL/INSTRUMENT CLUSTER - INSTALLA-
TION).
5. Connect the negative battery cable.

INSTALLATION - REMOTE KEYLESS ENTRY RELAY

1. Install the remote keyless entry relay (1).
POWER LOCKS - SERVICE INFORMATION 8N - 49