Chrysler 2005 Crossfire SRT6 Service Manual page 1164

8L - 98 LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
4. Disconnect the fog lamp harness connector (2)
from the fog lamp bulb (1).
5. Remove the fog lamp unit attachment bolts (3) and
remove the fog lamp unit from the front fascia
panel.
INSTALLATION
1. Position the fog lamp unit into the front fascia
panel.
2. Insert the fog lamp unit attachment bolts (1) and
secure.
3. Connect the fog lamp harness connector to the fog
lamp bulb (2).
4. Install the lower engine splash shield.
5. Connect the negative battery cable.
ZH