Removal; Installation - Chrysler 2005 Crossfire SRT6 Service Manual

ZH

REMOVAL

1. Disconnect the negative battery cable.
2. Disconnect the camshaft position sensor harness
connector (1).
3. Remove the retaining bolt (2).
4. Remove the camshaft position sensor from the cyl-
inder head.

INSTALLATION

Note: Lubricate the camshaft position sensor
O-ring with engine oil.
1. Inspect the camshaft position sensor O-ring (1) for
damage.
2. Lubricate the camshaft position sensor O-ring as
necessary.
IGNITION SYSTEM - SERVICE INFORMATION 8I - 7