Wiper Arms - Chrysler 2005 Crossfire SRT6 Service Manual

8R - 46 WIPERS/WASHERS - SERVICE INFORMATION
INSTALLATION
1. Insert the washer reservoir behind the right front
wheel and align the rubber mounting grommets.
2. Install the washer fluid filler tube (1) to the washer
reservoir.
3. Install the washer reservoir attachment bolt (2).
4. Connect the washer fluid level switch harness con-
nector (4).
5. Connect the washer pump motor harness connec-
tor and install the washer pump motor supply hose
(3).
6. Install the right front inner fender liner.
7. Connect the negative battery cable.

WIPER ARMS

DESCRIPTION
The Wiper Arms connect the wiper pivots and the wiper blades. They feature an over-center hinge that allows easy
access to the windshield glass for cleaning and service operations. A molded black plastic cap fits over the Wiper
Arm attachment nut for protection. The Wiper Arm cannot be adjusted or repaired. If faulty or damaged, the entire
wiper arm must be replaced. For complete removal procedures, refer to Wiper Arm removal in this section.
ZH