Chrysler 2005 Crossfire SRT6 Service Manual page 671

ZH
*NO SOUND FROM RIGHT REAR SPEAKER (CONTINUED)
2.
MEASURE RIGHT REAR SPEAKER CIRCUIT RESISTANCE
With the ignition off.
Connect a jumper wire between cavity 3 and cavity 4 of the Right
Rear Speaker harness connector.
Measure the resistance between cavity 14 (connector B) and cavity 13
(connector B) of the Power Amplifier harness connector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Right Rear Speaker. (Refer to 8 - ELECTRI-
CAL/AUDIO/SPEAKER - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Right Rear Speaker Ground circuit or Supply
Voltage circuit for an open.
Perform BODY VERIFICATION TEST.
AUDIO - ELECTRICAL DIAGNOSTICS 8A - 17