Chrysler 2005 Crossfire SRT6 Service Manual page 1333

ZH
3. Remove the front riser motor attachment screws
(2).
4. Remove the front riser motor.
INSTALLATION
INSTALLATION - HORIZONTAL MOTOR
1. Position the horizontal motor so that the notch (3)
is aligned as shown.
2. Install the horizontal motor attachment screws (1).
Tighten the motor screws to 4 N·m (35 in. lbs.).
3. Connect the horizontal motor harness connector.
4. Install the front seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION).
5. Connect the negative battery cable.
POWER SEATS - SERVICE INFORMATION 8N - 103