Chrysler 2005 Crossfire SRT6 Service Manual page 1472

8O - 116 RESTRAINTS - SERVICE INFORMATION
3. Move the seat to the full rearward position.
4. Remove the seat track front bolts (1).
5. Move the seat to the full forward position.
Note: The seat track rear bolts are easily accessed
when the seat back is tilted fully forward.
6. Remove the seat track rear bolts (1).
7. Remove the seat belt bolt (2) holding the seat belt
to the seat.
8. Disconnect the negative battery cable. Wait two
minutes for the system capacitor to discharge
before further service.
ZH