Chrysler 2005 Crossfire SRT6 Service Manual page 1346

8N - 116 POWER WINDOWS - ELECTRICAL DIAGNOSTICS
*RIGHT FRONT POWER WINDOW INOPERATIVE (CONTINUED)
3.
MEASURE RIGHT POWER WINDOW SWITCH SENSE CIRCUIT RESISTANCE
Turn the ignition off.
Disconnect the Body Control Module (BCM) harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance of the Right Power Window Switch Sense cir-
cuit from the Right Front Power Window Switch harness connector to
the BCM C4 harness connector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Body Control Module. (Refer to 8 - ELECTRI-
CAL/ELECTRONIC CONTROL MODULES/BODY CON-
TROL/CENTRAL TIMER MODULE - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Right Power Window Switch Sense circuit for
an open.
Perform BODY VERIFICATION TEST.
4.
MEASURE GROUND CIRCUIT RESISTANCE
Turn the ignition off.
Disconnect the Body Control Module (BCM) harness connector.
Note: Check connectors - Clean/repair as necessary.
Measure the resistance of the Ground circuit from the Right Front
Power Window Switch harness connector to the BCM C4 harness con-
nector.
Is the resistance below 5.0 ohms?
Yes >> Replace the Right Front Power Window Switch. (Refer to
8 - ELECTRICAL/POWER WINDOWS/POWER WINDOW
SWITCH - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the Ground circuit for an open.
Perform BODY VERIFICATION TEST.
ZH