Installation; Marker Lamp; Removal - Rear Marker Lamp - Chrysler 2005 Crossfire SRT6 Service Manual

ZH

INSTALLATION

1. Insert the bulb into the lamp socket and place the
license plate lamp lens (2) into position.
2. Install the attachment screws and secure. Close
the liftgate.
3. Connect the negative battery cable.

MARKER LAMP

REMOVAL

REMOVAL - REAR MARKER LAMP

1. Disconnect the negative battery cable.
2. Insert a trim stick (2) at the front edge of the rear
marker lamp lens (1), gently depress rearward and
lift out from the fascia.
3. Rotate the socket counterclockwise and remove
the rear marker lamp bulb from the socket.
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION 8L - 117