Headlamp Unit; Standard Procedure; Standard Procedure - Headlamp Unit Alignment - Chrysler 2005 Crossfire SRT6 Service Manual

8L - 112 LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION ZH

HEADLAMP UNIT

DESCRIPTION
The Headlamp Unit is a housing that integrates sepa-
rate bulbs for low beam (3) and high beam (1) head-
lamps. It also includes the turn signal bulbs (2) and
front position bulbs (6). The low beam, high beam and
turn signal bulbs are enclosed with access covers for
protection. One single harness connector (5) supplies
power from fuses within the Illumination Control Mod-
ule/IP fuse block, and ground.
The entire Headlamp Unit is mounted onto the front of
the core support structure and aimed with built in
adjustment screws (4).

STANDARD PROCEDURE

STANDARD PROCEDURE - HEADLAMP UNIT ALIGNMENT

HEADLAMP ALIGNMENT PREPARATION
1. Verify headlamp dimmer switch and high beam indicator operation.
2. Inspect and correct damaged or defective components that could interfere with proper headlamp alignment.
3. Verify proper tire inflation.
4. Clean headlamp lenses.
5. Verify that luggage area is not heavily loaded.
6. Fuel tank should be FULL. Add 2.94 kg (6.5 lbs.) of weight over the fuel tank for each estimated gallon of miss-
ing fuel.