Info-Center Synchronous - H3C SR6600 Command Reference Manual

Table 50 Default output rules
Output
destinatio
n
Console
Monitor
terminal
Log host
Trap buffer
Log buffer
SNMP
module
Log file
Examples
# Output VLAN module's trap information with a severity level of at least emergency to channel console.
All other system information cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel console debug state off log state off trap
state off
[Sysname] info-center source vlan channel console trap level emergencies state on

info-center synchronous

Use info-center synchronous to enable synchronous information output.
Use undo info-center synchronous to disable synchronous information output.
Syntax
info-center synchronous
undo info-center synchronous
Default
Synchronous information output is disabled.
Views
System view
Log
Source
Enabled/
modules
disabled
All
supported Enabled
modules
All
supported Enabled
modules
All
supported
Enabled
modules
All
supported Disabled
modules
All
supported Enabled
modules
All
supported Disabled
modules
All
supported Enabled
modules
Trap
Enabled/
Severity
disabled
Informatio
Enabled
nal
Informatio
Enabled
nal
Informatio
Enabled
nal
Informatio
Enabled
nal
Informatio
Disabled
nal
Debug Enabled
Debug Enabled
223
Debug
Enabled/
Severity
disabled
Debug Enabled
Debug Enabled
Debug Disabled
Informatio
Disabled
nal
Debug Disabled
Informatio
Disabled
nal
Debug Disabled
Severity
Debug
Debug
Debug
Debug
Debug
Debug
Debug