Connecting Interface Cables; Connecting An Ethernet Cable; Connecting A Synchronous/Asynchronous Serial Port Cable - H3C MSR 930 Installation Manual

Figure 24 Installing a GPS antenna
GPS antenna
1

Connecting interface cables

Connecting an Ethernet cable

Because fixed Ethernet ports support MDI/MDIX autosensing, you can use either a straight-
through cable or a crossover cable for connection.
To connect an Ethernet cable:
1. Connect one end of the cable to an Ethernet port on the router.
2. Connect the other end of the cable to the peer device.
3. Examine the port LED status. For more information, see
Figure 25 Connecting the router to a computer

Connecting a synchronous/asynchronous serial port cable

1. Identify the port type of the peer device and choose a serial port cable of correct type.
2. Plug the D28 end of the serial port cable into the D28 port of the SAE interface module.
If the WAN uses DDN line, connect the cable to the port of the CSU/DSU.
3. Examine the LINK LED status. For more information, see
2
20
"LED description."
"LED description."